Pd65-90b Pneumatic DTH Drilling Machine Drilling Rig for Sales

Pd65-90b Pneumatic DTH Drilling Machine Drilling Rig for Sales

  • Description

Prodrill PD65-90B DTH Drilling Device (or DTH drill rig/DTH driller) to assist wire noticed device in stone quarry. Accessible for vertical, horizontal and slant drilling.

PD65-90B Down The Gap Drilling Machin

Prodrill PD65-90B DTH drilling device attributes:

  1. It is mainly employed for drilling big holes for the passage of the diamond wires in stone quarry.
  2. It is multi-practical, CZPT for vertical, horizontal, slantwise drilling.
  3. The advance system and rotation mechanism are all pneumatic motors.
  4. The machine is advanced by chain wheel and chain bar, can drill holes routinely with large pace with round pace-reducer when drilling the horizontal holes, the equipment can cling to the ground, and have adequate twisting force.
  5. The foundation of the machine can be turned to any path to change the drilling place set by specific wedge blocks, easy to run and with substantial practicability.
  6. The foundation of the device have four adjusting screws to modify the drilling top to satisfy diverse drilling demands equipped with self-locking nuts which have substantial steadiness.
  7. The equipment is equipped with two down-the-gap hammers (different diameter). They can be replaced with every other whenever in accordance to demands, with rapidly drilling speed and higher precision.
  • Product: PD65-90B
  • Max. Depth of Drilling: 35-40m
  • Drilling Velocity: six-8m/h
  • Min. Air Force: .5-.7Mpa
  • Whole Compressed Air usage: 12-14m3/min
  • Observe Travel: 1m
  • Diameter of Drilling: Φ65-90mm
  • Down-The-Hole Hammer: Φ80/90
  • Drilling Path: Any path
  • Advance System: Pneumatic motor, reducer, chain
  • Modify Peak of the Down Jack: 220mm
  • Pneumatic Management Panel: Remote management, handbook alter route
  • Whole Bodyweight: 400KG

Major Merchandise:

one-12 inch middle-low/higher air force DTH hammers & bits
Large gap large air pressure DTH hammer using in h2o well, oil, fuel and development drilling 
Eccentric overburden drilling Equipment 
Gap opener bit 
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45,T51, ST58,GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all sorts of adapters 

Rewards:
Compared with the oversea manufacturers, our benefits are bellowing:
a. Our goods can match more than 95% against the authentic merchandise
b. Price are aggressive from the well-known brand names and ideal quality towards the small manufacturing facility
 
About Us:
1.    Our manufacturing unit has been specialised in manufacturing drilling tools and spare areas for more than 10 a long time.
2.    We have advanced technologies and products.
three.    Our technician has more than 13 year’s professional functioning encounter.
4.    Rock drilling equipment are exported throughout the globe. Major market: Norway, Turkey, United states of america, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, and so on.

 

Pd65-90b Pneumatic DTH Drilling Machine Drilling Rig for Sales