Tag Archives: good chain

China Good quality Agricultural Chain Combine Standard Chain Hoist Chain Rice Harvester Chain Ca 550/Ca650/Ca650/Ca620/C2060h/Ca557/Ca555, Roller Chain, Conveyor Chain

Product Description

OUR PRODUCTS LIST:
A and B series single/double/triple standard roller chain and no-standard roller chain

DIN/ISO ANSI Pitch Roller Width Pin Pin Lnner Plate Ultimate Average weight
KIN/ISO ANSL     between diameter length plate thick tensile tensile per
Chain Chain     inner plates       depth -ness strength strength meter
No. No. P d1 b1 d2 L Lc h2 T Q Q0 q
    max min max max max max max min
    mm mm mm mm mm mm mm mm kN/LB kN kg/m
*03C *15 4.7625 2.48 2.38 1.62 6.1 6.9 4.3 0.6 1.80/409 2 0.08
*04C-1 *25 6.35 3.3 3.18 2.31 7.9 8.4 6 0.8 3.50/795 4.6 0.15
*06C-1 *35 9.525 5.08 4.77 3.58 12.4 13.17 9 1.3 7.90/1795 10.8 0.33
085-1 41 12.7 7.77 6.25 3.58 13.75 15 9.91 1.3 6.67/1516 12.6 0.41
08A-1 40 12.7 7.95 7.85 3.96 16.6 17.8 12 1.5 14.10/3205 17.5 0.62
10A-1 50 15.875 10.16 9.4 5.08 20.7 22.2 15.09 2.03 22.20/5045 29.4 1.02
12A-1 60 19.05 11.91 12.57 5.94 25.9 27.7 18 2.42 31.80/7227 41.5 1.5
16A-1 80 25.4 15.88 15.75 7.92 32.7 35 24 3.25 59.70/12886 69.4 2.6
20A-1 100 31.75 19.05 18.9 9.53 40.4 44.7 30 4 88.50/20114 109.2 3.91
24A-1 120 38.1 22.23 25.22 11.1 50.3 54.3 35.7 4.8 127.00/28864 156.3 5.62
28A-1 140 44.45 25.4 25.22 12.7 54.4 59 41 5.6 172.40/39182 212 7.5
32A-1 160 50.8 28.58 31.55 14.27 64.8 69.6 47.8 6.4 226.80/51545 278.9 1.1
36A-1 180 57.15 35.71 35.48 17.46 72.8 78.6 53.6 7.2 280.20/63682 341.8 13.45
40A-1 200 63.5 39.68 37.85 19.85 80.3 87.2 60 8 353.80/80409 431.6 16.15
48A-1 240 76.2 47.63 47.35 23.81 90.5 103 72.39 9.5 51.30/115977 622.5 23.2

 

 DIN/ISO Pitch Roller Width Pin Pin Lnner Plate Ultimate Average weight
KIN/ISO     between diameter length plate thick tensile tensile per
Chain     inner plates       depth -ness strength strength meter
No. P d1 b1 d2 L Lc h2 T Q Q0 q
  max min max max max max max min
  mm mm mm mm mm mm mm mm kN/LB kN kg/m
04B-1 6 4 2.8 1.85 6.8 7.8 5 0.6 3.2/682 3.2 0.11
05B-1 8 5 3 2.31 8.2 8.9 7.1 0.8 5.0/1136 5.9 0.2
*06B-1 9.525 6.35 5.72 3.28 13.15 14.1 8.2 1.3 9.0/2045 10.4 0.41
08B-1 12.7 8.51 7.75 4.45 16.7 18.2 11.8 1.6 18.0/4091 19.4 0.69
10B-1 15.875 10.16 9.65 5.08 19.5 20.9 14.7 1.7 22.4/5091 27.5 0.93
12B-1 19.05 12.07 11.68 5.72 22.5 24.2 16 1.85 29.0/6591 32.2 1.15
16B-1 25.4 15.88 17.02 8.28 36.1 37.4 21 4.15/3.1 60.0/13636 72.8 2.71
20B-1 31.75 19.05 19.56 10.19 41.3 45 26.4 4.5/3.5 95.0/21591 106.7 3.7
24B-1 38.1 25.4 25.4 14.63 53.4 57.8 33.2 6.0/4.8 160.0/36364 178 7.1
28B-1 44.45 27.94 30.99 15.9 65.1 69.5 36.7 7.5/6.0 200.0/45455 222 8.5
32B-1 50.8 29.21 30.99 17.81 66 71 42 7.0/6.0 250.0/56818 277.5 10.25
40B-1 63.5 39.37 38.1 22.89 82.2 89.2 52.96 8.5/8.0 355.0/80682 394 16.35
48B-1 76.2 48.26 45.72 29.24 99.1 107 63.8   560.0/127272 621.6 25

Products show
 
 

  
  

    

Our workshop and hot treatment equipment.

  

 

   FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

 

Material: Alloy
Structure: Roller Chain
Surface Treatment: Polishing
Chain Size: 1/2"*11/128"
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Transport Package: Non-Fumigation Wooden Box, by Air, by Ocean
Samples:
US$ 2/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

roller chain

What are the factors to consider when selecting a roller chain for an application?

Choosing the right roller chain for an application involves considering several important factors. Here’s a detailed answer to the question:

1. Load Capacity: The load capacity of the roller chain should match or exceed the maximum anticipated load in the application. Consider the weight and type of the load, as well as any shock loads or dynamic forces that may be present.

2. Speed and RPM: Determine the required speed and RPM (revolutions per minute) of the roller chain. High-speed applications may require special high-speed chains with improved heat dissipation and reduced centrifugal forces.

3. Environment: Assess the operating environment of the application. Consider factors such as temperature, humidity, dust, dirt, chemicals, and exposure to corrosive substances. Choose a roller chain with appropriate corrosion resistance, sealing, lubrication, or protective coatings based on the specific environmental conditions.

4. Length and Pitch: Determine the required length and pitch of the roller chain based on the distance between the sprockets and the desired positioning of the driven and driving components.

5. Maintenance Requirements: Consider the desired maintenance level for the application. Some roller chains may require regular lubrication, while others offer maintenance-free or self-lubricating options. Assess the availability of maintenance resources and the impact of downtime on the overall operation.

6. Compatibility: Ensure compatibility between the roller chain and the sprockets used in the application. The roller chain and sprockets should have matching pitch, tooth profile, and number of teeth to ensure proper engagement and smooth operation.

7. Certification and Standards: In certain industries, compliance with specific certifications or standards may be required. Consider whether the roller chain meets industry-specific requirements such as ISO, ANSI, or industry-specific regulations.

8. Cost and Availability: Evaluate the cost and availability of the roller chain, including factors such as initial purchase price, long-term maintenance costs, and the availability of spare parts or replacement chains.

By carefully considering these factors and consulting with experts or manufacturers, you can select the most suitable roller chain for your specific application, ensuring reliable and efficient power transmission.

roller chain

How do roller chains handle reverse motion?

Roller chains are capable of handling reverse motion in applications where the direction of movement needs to be reversed. Here’s a detailed answer to the question:

1. Bi-Directional Operation: Roller chains are designed to operate in both forward and reverse directions. The chain links and rollers are constructed to engage with the sprockets in either direction, allowing the chain to smoothly transfer power and motion.

2. Engagement with Sprockets: When the roller chain is in reverse motion, the rollers on the chain engage with the sprocket teeth in the opposite direction compared to forward motion. The engagement between the chain and the sprockets ensures a secure and reliable power transmission, allowing the chain to efficiently transfer motion in reverse.

3. Lubrication and Maintenance: Proper lubrication is essential for the smooth operation of roller chains, including during reverse motion. Adequate lubrication reduces friction and wear, ensuring the chain’s longevity and performance. Regular maintenance, including lubrication and inspection, helps identify any issues that may affect the chain’s ability to handle reverse motion and allows for timely corrective actions.

4. Proper Tensioning: Maintaining proper tension in the roller chain is crucial for its performance in both forward and reverse motion. Adequate tension ensures the chain remains engaged with the sprockets and prevents slippage or disengagement during reverse operation. Proper tensioning can be achieved through tensioning devices or adjustable mounting arrangements.

5. Load Capacity: Roller chains are designed to handle various loads, including reverse motion. However, it’s important to consider the specific application requirements and select a roller chain with the appropriate load capacity and strength to withstand the forces experienced during reverse operation.

6. Alignment and Installation: Proper alignment of the roller chain and the sprockets is essential for reliable performance in both forward and reverse motion. Ensuring correct installation, including proper alignment and tensioning, helps maintain the chain’s engagement with the sprockets and ensures smooth operation in reverse.

It’s worth noting that the specific application requirements, such as speed, load, environmental conditions, and the type of roller chain, should be considered when determining the suitability of roller chains for reverse motion. Consulting the manufacturer’s guidelines and recommendations is important to ensure proper selection, installation, and maintenance of roller chains in applications involving reverse operation.

roller chain

How do roller chains handle shock loads?

Roller chains are designed to handle a certain level of shock loads, but their ability to withstand and absorb shocks depends on several factors. Here’s a detailed answer to the question:

1. Chain Design: The design of roller chains includes various elements that contribute to their ability to handle shock loads. These elements include the shape and size of the rollers, the pitch of the chain, and the material used for construction. High-quality roller chains are engineered to provide durability and strength, allowing them to withstand sudden impacts and shocks.

2. Material Selection: The choice of materials for roller chains plays a significant role in their ability to handle shock loads. Chains made from high-quality alloy steels or special heat-treated steels offer better toughness and resistance to impact. The material properties, including hardness and tensile strength, are important considerations in determining the chain’s ability to handle shock loads.

3. Chain Tension: Proper chain tension is crucial for handling shock loads effectively. Adequate tension ensures the chain remains engaged with the sprockets during sudden changes in load or direction. Insufficient tension can lead to chain slippage or disengagement, resulting in increased shock loads on the chain links. Regular inspection and adjustment of chain tension help maintain optimal performance.

4. Lubrication and Maintenance: Proper lubrication is essential for reducing friction and wear, especially when dealing with shock loads. Adequate lubrication ensures smooth movement of the chain and minimizes the impact of shocks on the chain’s components. Regular maintenance, including cleaning and relubrication, helps prolong the chain’s lifespan and ensures its ability to handle shock loads.

While roller chains are designed to handle a certain level of shock loads, it is important to consider the specific requirements of the application. In situations where high shock loads are expected, additional measures such as using shock-absorbing devices, selecting chains with higher load capacities, or implementing buffering systems may be necessary to protect the chain and ensure reliable operation.

China Good quality Agricultural Chain Combine Standard Chain Hoist Chain Rice Harvester Chain Ca 550/Ca650/Ca650/Ca620/C2060h/Ca557/Ca555, Roller Chain, Conveyor Chain  China Good quality Agricultural Chain Combine Standard Chain Hoist Chain Rice Harvester Chain Ca 550/Ca650/Ca650/Ca620/C2060h/Ca557/Ca555, Roller Chain, Conveyor Chain
editor by CX 2023-10-10

China Good quality 40-1r 50-1r 60-1r 80-1r 08b 10b 12b 16b 20b ISO/ANSI British Standard Customized OEM Short Long Pitch Plate Bush Industrial Transmission Conveyor Roller Chain

Product Description

Model NO. 06C/08A/10A/12A/16A/20A/24A/28A/32A/40A/06B/08B/10B/12B/16B/20B/24B/28B/32B/40B-1/2/3
Heavy duty
Chain Model Roller Chains
Structure (for Chain) Roller Chain
Specification GB/T, DIN, ANSI, ISO, BS, JIS.
Origin HangZhou, ZheJiang
Color Solid Color
Chain Color Customized

Our company

Wolff Chain Co. is 1 of the professional chain manufacturers in China. We focus on reseaching, manufacturing and trading of the chain drive with famous brands — “DOVON” and “DECHO”. We supply OEM services for many famous enterprises such as SUZUKI, XIHU (WEST LAKE) DIS., FAW, AGCO, JUMING as well. 

Wolff mainly producing the Transmission chains,Conveyor chains,Dragging Chains,Silent chains,Leaf chains,Roller chains,Special chain and many other series of chain products. Our technicians a have improved the chains quality to the world-level. High quality material selection, powerful and precise heat-treatment technology and excellent assembly methods ensure Wolff chains meet the tough and strict requirements for machines and vehicles. 

All of our products completely conform to the international standard such as ISO\DIN\ANSI\BS\JIS, etc. Wolff has been successfully certified by ISO9001 Quality Management System,SGS inspection and BV inspection. Wolff chains can be widely applied to many industries including automobile, motorcycle, forklift, wood processing machine, constructure machine, packing machine, food machine,and agricultural equipments. Wolff chains are popular in America,South America,Europe,Middle East, South East Asia and Africa markets.

Our workshop

Our certification

Welcome to our exhibition

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment
Surface Treatment: Oil Blooming
Structure: Roller Chain
Material: Carbon Steel
Type: Short Pitch Chain
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

roller chain

What are the advantages of using a roller chain over a cable or rope system?

Roller chains offer several advantages over cable or rope systems for power transmission. Here’s a detailed answer to the question:

1. Higher Efficiency: Roller chains provide a more efficient power transmission compared to cable or rope systems. They have lower friction losses, resulting in higher energy transfer and reduced power waste.

2. Precise and Reliable Motion: Roller chains offer precise and reliable motion control. They have minimal elongation and provide accurate positioning, making them suitable for applications that require precise speed and position control.

3. Greater Load Capacity: Roller chains have higher load-carrying capacity compared to cables or ropes of the same size. They can handle heavy loads and transmit high torque, making them suitable for applications that require robust power transmission.

4. Flexibility in Design: Roller chains offer flexibility in design and configuration. They can be easily customized to fit specific application requirements, such as different lengths, pitch sizes, and attachment options.

5. Durability and Longevity: Roller chains are known for their durability and long service life. They are constructed with high-quality materials and undergo heat treatment processes to enhance their strength and wear resistance, making them suitable for demanding industrial applications.

6. Maintenance and Replacement: Roller chains are relatively easy to maintain and replace. Lubrication and periodic inspection can help prolong their lifespan, and if a chain does wear out or break, it can be readily replaced with a new one, minimizing downtime.

7. Cost-Effective Solution: Roller chains are often a cost-effective solution for power transmission. They have a lower initial cost compared to some cable or rope systems and offer reliable performance over an extended period, resulting in lower maintenance and replacement costs.

While cable or rope systems have their own advantages in certain applications, roller chains excel in terms of efficiency, load capacity, precision, and durability, making them a popular choice for various industries, including manufacturing, automotive, agriculture, and more.

roller chain

How do roller chains handle angular misalignment between sprockets?

Roller chains are designed to accommodate a certain degree of angular misalignment between sprockets. Here’s a detailed answer to the question:

1. Flexibility: Roller chains have inherent flexibility, allowing them to adapt to slight misalignments between sprockets. The chain links can articulate and adjust their position to compensate for the angular misalignment. This flexibility helps to reduce stress on the chain and the sprockets.

2. Chain Articulation: The individual chain links in a roller chain are connected by pins, allowing them to rotate and articulate as the chain engages with the sprockets. This articulation enables the chain to follow the angular movement of the sprockets and maintain proper engagement. It helps to distribute the load evenly across the chain and minimize concentrated stresses on individual chain links.

3. Tolerance for Misalignment: Roller chains have a certain tolerance for angular misalignment between the sprockets. The exact amount of misalignment that a chain can handle depends on factors such as chain size, pitch, and design. However, it’s important to note that excessive misalignment can lead to accelerated wear, increased noise, and reduced chain life.

4. Proper Alignment: While roller chains can tolerate some degree of angular misalignment, it’s still essential to aim for proper sprocket alignment whenever possible. Proper alignment helps to optimize chain performance, minimize wear, and extend the lifespan of the chain and sprockets. Aligning the sprockets correctly ensures that the chain engages smoothly and uniformly with the sprocket teeth, reducing the risk of premature wear or failure.

5. Regular Inspection and Maintenance: To ensure optimal performance and longevity, it’s important to regularly inspect the roller chain system for any signs of misalignment or excessive wear. Routine maintenance, such as lubrication and tension adjustment, helps to mitigate the effects of misalignment and promotes smooth operation.

While roller chains can handle a certain degree of angular misalignment, it’s always recommended to minimize misalignment and strive for proper sprocket alignment to ensure optimal performance, efficiency, and longevity of the chain and sprocket system.

roller chain

How do roller chains compare to belt drives in terms of efficiency?

Roller chains and belt drives are both widely used power transmission systems, but they differ in terms of efficiency. Here’s a detailed answer to the question:

1. Mechanical Efficiency: Roller chains generally have higher mechanical efficiency compared to belt drives. The engagement between the chain and sprockets provides a positive drive with minimal slippage, resulting in efficient power transfer. Belt drives, on the other hand, can experience some slip, especially in high-torque or heavy-load applications, leading to lower efficiency.

2. Size and Length: Roller chains are typically more compact and have a shorter pitch length compared to belt drives. This allows for more compact machine design and closer shaft spacing, reducing the overall size and weight of the power transmission system.

3. Load Capacity: Roller chains are known for their high load-carrying capacity, making them suitable for heavy-duty applications. They can handle high loads and transmit significant amounts of power without compromising performance. Belt drives have lower load-carrying capacity and are more commonly used in lighter-duty applications.

4. Speed and Torque: Roller chains are suitable for both high-speed and high-torque applications. They can operate at high rotational speeds while transmitting significant torque. Belt drives, on the other hand, may have limitations in terms of speed and torque capacity, especially in demanding applications.

5. Maintenance and Durability: Roller chains require regular lubrication and maintenance to ensure optimal performance and longevity. Belt drives, on the other hand, are generally considered maintenance-free. However, if a belt drive becomes misaligned or experiences excessive wear, it may need to be replaced entirely. Roller chains, with proper maintenance, can be more durable and have longer service life.

It’s important to note that the choice between roller chains and belt drives depends on various factors, including the specific application requirements, load conditions, speed requirements, and space constraints. Each system has its advantages and considerations, and selecting the most suitable option should be based on a careful evaluation of these factors.

China Good quality 40-1r 50-1r 60-1r 80-1r 08b 10b 12b 16b 20b ISO/ANSI British Standard Customized OEM Short Long Pitch Plate Bush Industrial Transmission Conveyor Roller Chain  China Good quality 40-1r 50-1r 60-1r 80-1r 08b 10b 12b 16b 20b ISO/ANSI British Standard Customized OEM Short Long Pitch Plate Bush Industrial Transmission Conveyor Roller Chain
editor by CX 2023-09-20

China Good quality 450e 450g Bulldozer Excavator Loader Backhoe Rubber Track Sprocket Roller Undercarriage Parts ID1354/37 Track Link Chain Shoe Assembly

Product Description

1. Description:

Part No.:  ID1354/37
Machine No.:  450E 450G 
Description:  Track Link
Logo:  Beneparts
Color:  Yellow or others
Production Method:  Forging/Casting
Material:  40Mn/35MnB
Surface hardness:  HRC 52 ~ 58

More products:
Bucket tooth:  product/jJArxYWdhhks/China-Spare-Parts-Track-Bushing-Excavator-Pin-40cr-42CrMo-Bucket-Link-Pin-Link-Pin-Replacement-Bucket-Tooth-Locking-Pins-Forged-Bucket-Tooth-Pin-K170-Pin-2320170.html
Rubber track: product/yQLRiCgPvAVJ/China-Mini-Excavator-Rubber-Track-Undercarriage-Dx340LC-Machinery-Lubricated-Dry-Track-Link-Shoe-Assy-Track-Chain.html

Track roller: product/jmWpigyGJLcA/China-246-571-Roller-Gp-Track-Single-Flange-Excavator-Undercarriage-Parts-Down-Upper-Lower-Roller-Idler-Sprocket-Track-Roller.html
Grader blade:  product/XZlfQcLdlFhi/China-Construction-Machinery-Parts-Grader-Blade-Motor-Grader-Carbon-Steel-Boron-Steel-Dbf-Cutting-Edge-Bulldozer-4t6694.html
Track link chain:  product/yQLRiCgPvAVJ/China-Mini-Excavator-Rubber-Track-Undercarriage-Dx340LC-Machinery-Lubricated-Dry-Track-Link-Shoe-Assy-Track-Chain.html
Bucket:  product/UdMAiYuwXGhW/China-China-Heavy-Equipment-Buckets-Wh60c-Q345b-3-4cx-12-Bucket.html
Chocky bar:  product/kyPmTlxusBhU/China-Excavator-Bucket-Protection-Spare-Parts-CB1-Teeth-Pins-Retainer-Bushing-Locker-80-125r.html
2. Our products range

  
3. Our production line:

4.Popular items blow for reference:

Brand Model
Track Roller,                                                            Top Roller,                                                      Sprocket,                                                          Idler,                                                            Track Link,                                                         Track Shoes
   PC18-2 PC20-5/7 PC30-5/6/7/8 PC40-5/6/7
PC50/PC55 PC60-5/6/7 PC100-5/6/7 PC120-5-6-7
PC200-3/5/6/7/8 PC220-3/5/6/7/8 PC200LC-3/5/6/7/8 PC220-3/5/6/7/8
PC300-5-6-7 PC300LC-/5-6-7 PC350-5/6/7 PC350LC-5/6/7
PC360-5/6/7 PC360LC-5/6/7 PC400-1/3/5/6/7 PC400LC-1/3/5/6/7
PC450-5/6/7 PC450LC-5/6/7 PC600 PC800
   
   EX30 EX40 EX55 EX60-2/3/5
EX70 EX100-1/3/5/ EX120-1/3/5 EX150
EX200-1/2/3/5 EX200LC-1/2/3/5 EX220-1/2/3/5 EX220LC-1/2/3/5
EX270-1/2/5 EX270LC-1/2/5 EX300-1/2/3/5 EX300LC-1/2/3/5
EX330 EX330LC EX400-1/2/3/5 EX400LC-1/2/3/5
EX450-1/2/3/5 EX450LC-1/2/3/5 UH07-7 UH081
UH083 UH045 UH571  
   
  ZAX55 ZAX70 ZAX120 ZAX200
ZAX210 ZAX230 ZAX240 ZAX330
ZAX450      
   
       
   
     DH55 DH80 DH130 DH150
DH220 DH258 DH280 DH300
DH320 DH360 DH370 DH400
DH420 DH500    
DX300 DX370 DX380  
   
  SK035 SK035SR SK30 SK35
SK45 SK50-1 SK50-6 SK55
SK60-3 SK60-1/2/5 SK60-8 SK100
SK120 SK130-8 SK200-3/5/8 SK210
SK230 SK250 SK300 SK320
SK330 SK350 SK07N2  
   
    SH35 SH55 SH60 SH65
SH75 SH100 SH120 SH120A3
SH200 SH220 SH265 SH280
SH300 SH320 SH340 SH350
SH430 LS2800    
   
    HD250 HD400 HD450 HD700
HD770 HD820 HD1571 HD1250
HD1430      
   
      R55 R60-5/7/8 R80 R130
R150LC-7 R200 R210-3 R220-5
R225-7 R275 R290 R300
R320 R305 R360 R450
   
  R914 R924 R934C R944C
   
  CX35 CX45 CX55 CX240
   
  KX35 KX50 KX55 KX80
KX185      
   
  SWE35 SWE40 SWE50 SWE55
SWE60 SWE70 SWE85 SWE330
   
  IHI30 IHI35 IHI80 IHI85
   
  TB150 TB175    
   
  FR65 FR85    
   
   
       SY65 SY200 SY215 SY330
   
     YC13 YC35 YC45 YC60
YC85 YC135    
   
   
   VIO30 YM30 VIO35 YM35 VIO40 YM40 VIO55 YM55
VIO75 YM75      
   
    D3B D3C D4 D4D D4E
D4H D5 D5B D5C
D5H D5M D5N D6
D6C D6D D6R D6H
D6T D7G D7R D7H
D8N D8L D8T D8R
D8H D8K D9L D9N
D9R D9T D10N D10R
D10T D11N D11R  
   
   D20 D31 D37EX-21 D40
D41P-6 D41E-6 D50 D53
D51EX-22 D60 D65 D65-12
D61EX-12 D65EX-12 D65PX-12 D80
D85 D85EX-15 D85-21 D155
D155A-1 D155A-2 D155A-3 D155A-5
D155-6 D275 D355A-3 D375-5
BD2G      

5. Our warehouse:

6.Company information

HangZhou CZPT Machinery co., Ltd as your reliable Undercarriage parts supplier, offering full range of replacement parts suitable for all kinds of earthmoving machines which apply to mining, construction, agriculture etc. Like Excavator, Bulldozer, Loader, Backhoe, Scraper, Crusher and so on. The replacement parts that we supply including casting parts like idler, sprocket, top roller, track link, track roller, track shoes…, etc. and forged parts like forged idler, sprocket, top roller, track link, track roller, track shoes…, etc. 
 
Beneparts has a very strong sales team and firmly cooperated manufacturer with high-tech and focus on quality with more than 28 years experience.
 
Our advantages are 4 fold, our:
1.strong technical team, and we have the ability to formulate materials to meetthe specific needs of our customer’s projects.
2.Perfect quality monitoring system, and full range of advanced facilities, like Component analysis machine, Impact Machine, Tensile Strength machine etc.
3. Rich experience to do OEM/ODM business, we can develop items as per drawings and samples if you have specific requirement.
4. Efficient management, we can short delivery time and we have good after sale service which keep long term business cooperation with our customers.
 
Our commitment to you is always providing quick, convenient, effective customer service.
Look CZPT to meeting you!

Shipping Cost:

Estimated freight per unit.



To be negotiated
Type: Track Link
Application: Bulldozer
Certification: CE
Customization:
Available

|

Customized Request

roller chain

Can roller chains be used in low-temperature environments?

Yes, roller chains can be used in low-temperature environments, but there are several factors to consider for their proper performance and longevity:

1. Material Selection: Choose roller chains that are specifically designed for low-temperature applications. These chains are typically made from materials that can withstand the cold temperatures without becoming brittle or losing their mechanical properties. Common materials used in low-temperature roller chains include stainless steel, nickel-plated steel, or special alloys.

2. Lubrication: Proper lubrication is essential in low-temperature environments to ensure smooth operation and prevent excessive wear. However, it’s important to consider the type of lubricant used as some lubricants may become less effective or thickened at low temperatures. Select lubricants that are specifically formulated for low-temperature applications to maintain proper chain lubrication and reduce friction.

3. Temperature Ratings: Check the temperature ratings provided by the roller chain manufacturer. Ensure that the roller chain is suitable for the specific low-temperature range of your application. Different roller chains have different temperature limits, and exceeding these limits can lead to decreased performance, increased wear, and potential chain failure.

4. Impact Resistance: Low temperatures can make materials more susceptible to impact damage. It’s important to ensure that the roller chain selected has good impact resistance properties to withstand any sudden shocks or loads that may occur during operation in low-temperature environments.

5. Environmental Factors: Consider the overall environmental conditions of the low-temperature environment. Factors such as moisture, ice, or freezing conditions can affect the performance of roller chains. In such cases, additional protection measures like sealing, covers, or regular maintenance may be necessary to prevent ice formation or moisture ingress.

6. Regular Inspection and Maintenance: Regularly inspect the roller chains for signs of wear, damage, or inadequate lubrication. Monitor their performance and address any issues promptly. In low-temperature environments, extreme cold can exacerbate any existing issues, so proactive maintenance is crucial to ensure the continued reliability of the roller chains.

By considering these factors and selecting roller chains designed for low-temperature applications, you can ensure their proper functioning and durability in low-temperature environments.

roller chain

What are the benefits of using a roller chain in printing machinery?

Roller chains offer several advantages when used in printing machinery. Here’s a detailed answer to the question:

1. High Strength and Durability: Roller chains are designed to withstand heavy loads and provide high tensile strength, making them suitable for the demanding requirements of printing machinery. They can efficiently transmit power and handle the stress and torque generated during the printing process.

2. Precise and Reliable Power Transmission: Roller chains provide accurate and reliable power transmission, ensuring consistent and precise movement of the printing components. This is crucial for maintaining print quality, registration, and alignment of the printed material.

3. Wide Range of Speeds: Roller chains can accommodate a wide range of speeds, allowing for flexibility in printing machinery. Whether it’s high-speed printing or slower, more precise operations, roller chains can adapt to different speed requirements.

4. Easy Installation and Maintenance: Roller chains are relatively easy to install and maintain. They can be adjusted, lubricated, and replaced as needed, minimizing downtime and ensuring the continuous operation of printing machinery.

5. Versatility and Adaptability: Roller chains can be customized to meet specific requirements of printing machinery, such as different chain sizes, lengths, and attachments. This versatility allows for easy integration into various types of printing equipment and processes.

6. Cost-Effective Solution: Roller chains offer a cost-effective power transmission solution for printing machinery. They have a long service life, reducing the need for frequent replacements, and their availability in various sizes and configurations allows for efficient use in different printing applications.

In summary, the use of roller chains in printing machinery provides strength, reliability, precision, and versatility. They contribute to the smooth operation of the equipment, ensuring high-quality prints and increased productivity in printing applications.

roller chain

What are the key components of a roller chain?

A roller chain consists of several key components that work together to facilitate power transmission. Here’s a detailed answer to the question:

1. Inner and Outer Plates: The inner and outer plates are flat metal plates that form the sides of the roller chain. They provide support and protection to the other components and help maintain the proper spacing between the rollers.

2. Rollers: The rollers are cylindrical components that are positioned between the inner and outer plates. They are responsible for engaging with the sprockets and transmitting power. The rollers rotate freely on the bushings and reduce friction during operation.

3. Bushings: The bushings are cylindrical sleeves that fit inside the rollers. They provide a low-friction surface for the rollers to rotate on and help reduce wear and extend the life of the chain.

4. Pins: The pins are cylindrical metal rods that connect the inner and outer plates. They pass through the bushings and hold the chain together. The pins are press-fitted into the plates and provide a pivot point for the rollers.

5. Link Plates: The link plates are the connecting elements between adjacent chain links. They are the plates that hold the pins in place and provide structural integrity to the chain.

6. Master Link or Connecting Link: The master link, also known as the connecting link, is a special link that allows for easy installation and removal of the roller chain. It typically has a removable pin or clip that enables the chain to be opened and closed without the need for special tools.

These components work together to form a continuous loop that engages with the sprockets and transfers power from one shaft to another. The precise design and construction of these components contribute to the overall strength, durability, and efficiency of the roller chain.

China Good quality 450e 450g Bulldozer Excavator Loader Backhoe Rubber Track Sprocket Roller Undercarriage Parts ID1354/37 Track Link Chain Shoe Assembly  China Good quality 450e 450g Bulldozer Excavator Loader Backhoe Rubber Track Sprocket Roller Undercarriage Parts ID1354/37 Track Link Chain Shoe Assembly
editor by CX 2023-09-05

China Good quality DIN Power Transmission Industry Carbon Steel Stainless Steel Heavy Duty a B Series Conveyor Chain for Industrial Applications Roller Chain 08b\10b\12b\16b

Product Description

 

Product Description

Vision Group is 1 of the largest manufacturers of Driving Chain, Conveyor Chain, Motorcycle Chain, Hoisting Chain, Agriculture Chain, Stainless Steel Chain, Dropped Forged Rivetless Chain, Long Pitch Conveyor Chain and so on.

 

GB/T, DIN, ANSI, ISO, BS, JIS.

 

ISO9001: 2000 and ISO1400: 2004.
 

Product Attribute

Product name Transmission Standard Roller Chain

Surface Treatment

Shot Peening ,Tempering Oiling  ,Nickel-plated
Grease, zince plated, Heat Treatment ,Stain proofing
Carburizing ,Pre-stretched and anti-fatigue ,Quenching    
Product application Industry machine,Agriculture, mining, metallurgy,
petrochemical industry, lifting
and transportation and other industries
Product Series

Series A, Series B, Heavy Duty
Zinc-plated, Nickel-plated
 SP series ,SH series
Double pitch series

material

Stainless steel and carbon steel

structure

Simplex/Duplex/Triplex

Port

Any sea port or airport in China

Brand TV OEM
Payment

L/C, T/T, D/P, Western Union

Package

Chain, Plastic Bag, Color Box, Wooden Case. or OEM

A Series 03C,04C-1,06C-1,085-1,08A-1,10A-1,12A-1,16A-1,20A-1,24A-1,28A-1,32A-1,36A-1,40A-1,48A-1.

15,25,35,41,40,50,60,80,100,120,140,160,180,200,240
 

04C-2,06C-2,085-2,08A-2,10A-2,12A-2,16A-2,20A-2,24A-2,28A-2,32A-2,36A-2,40A-2,48A-2.

25-2,35-2,41-2,40-2,50-2,60-2,80-2,100-2,120-2,140-2,160-2,180-2,200-2,240-2.
 

04C-3,06C-3,085-3,08A-3,10A-3,12A-3,16A-3,20A-3,24A-3,28A-3,32A-3,36A-3,40A-3,48A-3.

25-3,35-3,41-3,40-3,50-3,60-3,80-3,100-3,120-3,140-3,160-3,180-3,200-3,240-3.
 

B Series 05B-1,06B-1,08B-1,10B-1,12B-1,16B-1,20B-1,24B-1,28B-1,32B-1,40B-1,48B-1,56B-1,64B-1,72B-1.
 
05B-2,06B-2,08B-2,10B-2,12B-2,16B-2,20B-2,24B-2,28B-2,32B-2,40B-2,48B-2,56B-2,64B-2,72B-2.
 
05B-3,06B-3,08B-3,10B-3,12B-3,16B-3,20B-3,24B-3,28B-3,32B-3,40B-3,48B-3,56B-3,64B-3,72B-3.
 
Heavy Duty  08AH-1,10AH-1,12AH-1,16AH-1,20AH-1,24AH-1,28AH-1,32AH-1,36AH-1,40AH-1,48AH-1

35H,40H,50H,60H,80H,100H,120H,140H,160H,180H,200H,240H
 

12AH-2,16AH-2,20AH-2,24AH-2,28AH-2,32AH-2,40AH-2,

35H-2,40H-2,50H-2,60H-2,80H-2,100H-2,120H-2,140H-2,160H-2,180H-2,200H-2,240H-2.
 

12AH-3,16AH-3,20AH-3,24AH-3,28AH-3,32AH-3,40AH-3

35H-3,40H-3,50H-3,60H-3,80H-3,100H-3,120H-3,140H-3,160H-3,180H-3,200H-3,240H-3.
 

Double pitch Series
 
208A,208B,210A,210B,212A,212B,216A,216AH,216B,220A,220B,224A,224B,228B,232B

2040,2050,2060,2080,2080H,2100,2120
 

We also carry out OEM according to your requirements

 

Product Parameters

Our Advantages

Company advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.

Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.

With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.

WHY CHOOSE US

Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.

Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets

Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.
100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.

FAQ

Q1: What’s your average lead time?
A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate.

Q2: Is your price better than your competitors given the same quality?
A: Definitely YES. We provide the most competitive price in the power transmission industry. If price disparity exists, we’ll be more than happy to do a price match.
Q3: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q4: Can we inspect the goods before shipment?
A: Yes. You or your representative or any third-party inspection party assigned is allowed access to our facility and do the inspection.

Q5: What kind of payment method is acceptable for your mill?
A: We’re flexible. We take T/T, L/C, or any other online payment methods so long as it’s applicable for you.

Q6: What if I have any other questions?
A: Whenever in doubt, you’re always encouraged to consult our sales associate any time – They will help you to your satisfaction.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Usage: Transmission Chain
Material: Alloy/Carbon Steel
Surface Treatment: Polishing
Customization:
Available

|

Customized Request

roller chain

How do roller chains handle dusty or dirty environments?

Roller chains are designed to operate effectively in various environments, including dusty or dirty conditions. Here’s a detailed answer to the question:

1. Sealed Construction: Many roller chains feature a sealed construction, which helps to protect the internal components from dust, dirt, and other contaminants. The seals help to prevent the entry of particles into the chain’s joints and lubrication areas, reducing the risk of wear and damage caused by abrasive particles.

2. Proper Lubrication: Adequate lubrication is crucial in dusty or dirty environments. The lubricant forms a protective film on the chain’s surfaces, reducing friction and wear. It also helps to flush away and prevent the accumulation of dirt and particles. Regular lubrication maintenance is necessary to ensure the chain remains properly lubricated and protected.

3. Periodic Cleaning: In dusty or dirty environments, it is important to periodically clean the roller chain to remove accumulated debris. This can be done using compressed air or gentle brushing. Care should be taken not to use excessive force or abrasive materials that could damage the chain.

4. Proper Chain Covering: In some applications, it may be necessary to use chain covers or guards to provide additional protection against dust and debris. These covers help to shield the chain from direct exposure to contaminants, reducing the risk of accelerated wear and damage.

5. Regular Inspection: Regular visual inspection of the roller chain is essential in dusty or dirty environments. This allows for the early detection of any signs of wear, corrosion, or contamination. If any issues are identified, appropriate maintenance or replacement should be performed promptly.

It’s important to note that even with these measures, roller chains used in dusty or dirty environments will still require proper maintenance and periodic cleaning. Following manufacturer recommendations for lubrication, cleaning, and inspection will help ensure the longevity and reliable performance of the roller chain in such conditions.

roller chain

How do roller chains handle static loads?

Roller chains are primarily designed for transmitting power and handling dynamic loads, which involve motion and varying forces. However, roller chains can also handle static loads to some extent. Here’s a detailed answer to the question:

1. Load Distribution: When a roller chain is subjected to static loads, the weight or force is evenly distributed across multiple rollers and pins. This helps to distribute the load more effectively and reduces stress concentrations on individual components. The load is transferred from one roller to another through the pins, ensuring a more balanced distribution.

2. Stiffness: Roller chains possess a certain degree of stiffness that enables them to resist static loads. The rigid construction of the chain, including the link plates and pins, helps maintain the integrity of the chain under static conditions. This stiffness allows the chain to support the applied load without excessive elongation or deformation.

3. Lubrication: Proper lubrication is essential for roller chains to handle static loads effectively. Lubrication helps reduce friction and wear, which can occur even under static conditions due to the weight of the load. Adequate lubrication ensures smooth movement of the chain and minimizes the risk of surface damage or increased friction during load-bearing.

4. Chain Preload: In some cases, applying a pre-load or initial tension to the roller chain can help improve its ability to handle static loads. The pre-load helps to eliminate any slack or looseness in the chain, enhancing its rigidity and reducing the potential for excessive elongation or misalignment when subjected to static forces.

While roller chains can handle static loads, it’s important to note that they are primarily designed for dynamic applications involving motion. Excessive static loads or prolonged exposure to static conditions may lead to increased wear, elongation, or deformation of the chain. In scenarios where the majority of the load is static, alternative power transmission systems or load-bearing mechanisms may be more suitable.

roller chain

How do you properly lubricate a roller chain?

Proper lubrication is crucial for the performance and longevity of a roller chain. Here’s a detailed answer to the question:

1. Clean the Chain: Before lubricating the roller chain, ensure that it is clean and free from dirt, debris, and old lubricant. Use a suitable cleaning agent or solvent to remove any contaminants.

2. Select the Right Lubricant: Choose a high-quality lubricant specifically designed for roller chains. Consider factors such as the operating conditions, load capacity, speed, and temperature range when selecting the lubricant. Consult the manufacturer’s recommendations for the appropriate lubricant type and viscosity.

3. Apply the Lubricant: Apply the lubricant evenly to the entire length of the roller chain. You can use a lubrication system, brush, or spray applicator for effective coverage. Ensure that the lubricant penetrates between the rollers and bushings, as well as the pins and inner plates.

4. Remove Excess Lubricant: After applying the lubricant, remove any excess oil or grease from the chain. Excessive lubrication can attract dirt and debris, leading to accelerated wear and chain failure. Wipe off any excess lubricant using a clean cloth.

5. Reapply Lubricant Regularly: Roller chains require regular lubrication to maintain optimal performance. The frequency of lubrication depends on the operating conditions and the manufacturer’s recommendations. In general, lubrication should be done at regular intervals or when the chain shows signs of dryness or wear.

6. Monitor and Inspect: Regularly monitor the condition of the lubricated roller chain. Look for any signs of wear, rust, or inadequate lubrication. If necessary, reapply the lubricant or adjust the lubrication frequency based on the chain’s performance and operating conditions.

Proper lubrication helps reduce friction, wear, and heat generation, ensuring smooth operation and extending the life of the roller chain. Following the manufacturer’s recommendations and best practices for lubrication will help maintain the chain’s performance and prevent premature failure.

China Good quality DIN Power Transmission Industry Carbon Steel Stainless Steel Heavy Duty a B Series Conveyor Chain for Industrial Applications Roller Chain 08b\10b\12b\16b  China Good quality DIN Power Transmission Industry Carbon Steel Stainless Steel Heavy Duty a B Series Conveyor Chain for Industrial Applications Roller Chain 08b\10b\12b\16b
editor by CX 2023-08-10

China OEM marine hardware motorcycle parts Conveyor Chain Roller Chains /Hollow Chains/stainless steel Pintle Chain (M Series) with Good quality

Product Description

Conveyor Chains (M Series)
Chain No.: M20, M28, M40, M56, M80, M112, M160, M224, M315, M450
Pitch: 40.0mm to 200.0 mm
For Free Samples
Prompt Delivery
Green Product
International Approvals
Experienced Staff

Why choose us?
1. HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd established in 1991, we have 5 subsidiaries in China and also have 6 subsidiaries abroad;
2. We covering a production area of 200, 100 square meters, have more than 1, 800 sets of advanced equipment and over 3, 100 highly skilled employees, the annual production capacity has exceeded 20, 000, 000 meters;
3. We specialized in producing all kinds of standard chains and special chains, such as A or B series chains, driving chains, conveyor chains, dragging chains, agricultural chains and so on;
4. We have obtained ISO9001, ISO14001, ISO16969, AAA and API certificates.

The company is specialized in producing all kinds of standard chains and special chains, E. G. A or B series chains, automobile chains, stainless steel chains, combine harvester chains, heavy-duty cranked link transmission chains, stereo garage chains and maintenance-free chains etc.

In recent years, it invests the capital and depends on the improvement of technology to accelerate the step of new product development and the step of technology reform. It intends to produce high strength and precision chains in order to meet requirements of the domestic and overseas markets. We have enclosed our catalog, which introduces our company in detail and covers the main products we supply at present. You may also visit our online company introduction which includes our latest product line.

Should any of these items be of interest to you, please let us know. We will be happy to give you a quotation CZPT receipt of your detailed requirements.

We look CZPT to receiving your enquires soon.

 

Usage: Transmission Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*11/128"
Structure: Roller Chain
Customization:
Available

|

Customized Request

chain

Pin chain conveyor

The choice between roller chains and friction drives depends on the usage environment. Roller chains are more resistant to dirty environments and are more suitable for conveying bulk products. The pivot chain is designed to handle highly bulk products. Ideally, the center-to-center distance between the two axles should be thirty to fifty times the chain pitch. The size of the sprocket will depend on the usage environment, which will also determine the fatigue strength and resistance of the chain.

Roller chains are more resistant to dirty environments

There are some key differences between drive chains and roller chains. The most notable difference is in the materials. Drive chains are generally more durable than roller chains. However, both chains are prone to dirty environments. While solution chains are sometimes used for heavy-duty tasks, roller chains are often used in dirtier environments. In fact, drive chains are often used when the job is very dirty and the chain has to slide on the rails.
The new lubricant used on the roller chain attracts dirt and other debris to the surface of the chain and prevents lubricant from entering the load-carrying parts of the chain, such as hinge plates, bushings, and rollers. When dust is drawn into these components, lubricants, and dirt form an abrasive paste that accelerates wear.
Lube-free roller chains keep chains clean longer. This makes it easier to specify and install in areas with strict hygiene requirements. CZPT lube-free roller chains meet NSF-H1 lubrication standards. However, lubricated roller chains are still suitable for areas where food contact is unlikely.
Stainless steel roller chains are particularly resistant to acids, alkalis, and low-temperature environments. Since stainless steel is softer than carbon steel, lubricants are not as effective at preventing dirt from entering the chain. Stainless steel roller chains have a higher strength rating than standard chains, but are not as strong as chains made from carbon steel. If you are using a roller chain in a very dirty environment, you should use a stainless steel chain.

A stud chain is more efficient than a friction drive

The present invention relates to a light-duty double-ended chain that is more efficient than conventional chains. Stud chains are made by die-forging bar steel into roughly the-shaped links. This method avoids loss of shear strength due to bending and also minimizes the welded portion. The double-headed chain is light in weight and has strong resistance to fatigue damage.
This chain type has a stud-style design. Stud-shaped design provides greater tensile strength and prevents tangling. Each stud is formed by die forging and is usually shaped like an e or th. However, it is not necessary for each stud to have a uniform cross-sectional shape. Different cross-sectional shapes can be used depending on the application.
Stud chains are more efficient than friction drives because the studs in the chain are integrated. Stud links resist large breaks. Its applications are in conveyor chains and fisheries. Wear tested on boat chains made of SBC material. In the process, bolt chains were found to be more efficient than friction drives. Its applications are rapidly expanding.
Double-ended chains are more efficient for high-load applications. It features studs throughout its internal width to prevent kinking. Chains of this type are commonly used for heavy lifting machinery. Other types of chains are roller chains, power transmission chains, and bushing roller chains. These types of chains are also widely used in motorcycle, bicycle and transportation applications. In addition to being more efficient, stud chains also have fewer wear problems than friction drive chains.
A study on the difference between wear percentage and friction time showed that stud chains are more efficient than friction drives. The friction strips were measured at the beginning of the test. Take it off after 6 hours, 10080 times, and take pictures with the same diameter. As a boundary value, the diameter of the friction strip is smaller than that of a conventional chain. This shows that the present invention has better wear resistance than friction drives.
chain

Shaft chains designed for conveying bulk products

Pivot chains are versatile conveyors used in many applications. Low back type, small backrest distance, rear opening design to prevent the product from sticking to the joints and causing stiffness. Stainless steel and carbon bushing pin chains do not have pre-rotating rollers. In contrast, bucket elevators do not use pivot chains.
CZPT pin chains provide unmatched performance in agricultural and industrial machinery. They are constructed from a single cast barrel and are connected by hardened steel pins. CZPT’s steel pivot chains are strong enough to withstand the corrosive environments of agricultural and industrial applications. The steel pins in the CZPT Pintle Chain are hardened and riveted to ensure long-term durability and optimum performance.
Lifeguard chains feature patented interlocking side links that reduce gaps between adjacent side panels. They can withstand a variety of applications and will never break under pressure. These chains are available in 1/2” and 1” pitch configurations. CZPT combines both types of pin chains to achieve the best of both worlds. CZPT features dual pin chains and pin joints to increase chain durability and reduce maintenance hassles.
CZPT’s engineering team can custom design pivot chains for your specific application. Designed for specific speed, friction, temperature and wear requirements, these chains are ideal for a variety of applications. Headquartered in Milwaukee, Wisconsin, the company operates on two strategic platforms: Food and Beverage and Industrial Applications. The products of these companies are used in food, energy and manufacturing.

China OEM marine hardware motorcycle parts Conveyor Chain Roller Chains /Hollow Chains/stainless steel Pintle Chain (M Series)   with Good qualityChina OEM marine hardware motorcycle parts Conveyor Chain Roller Chains /Hollow Chains/stainless steel Pintle Chain (M Series)   with Good quality
editor by CX 2023-05-12

China Good quality Factory Direct Sale Rebeaming Machine/Long Chain Beaming roller chain breaking tool

Product Description

Product Description

Factory Direct Sale Rebeaming Machine/Long Chain Beaming

                       Buffing device                                                            Tension frame                                                          Upper reversing

Application:This machine is applied to distribute rope warp into sheet warp, evenly winded on beam through expansion reed,is a preparatory machine before denim fabric weaving. Winding speed,linear speed,tension and length can be set according to process requirement.

Machine functions: wide single yarn tension range,uniform tension control,easy operation,optional parts can be provided according to user habits,user can easily master warping process with machine process data library.

Main Technical Parameters:

Working Width(mm) 1600,1650,1800
Beam diameter(mm) 800,1000
Warping speed(m/min) 0-500
Brake distance (m) ≤1.5 at highest speed
Winding density(g/cm³) 0.3-0.65
Length(mm) 2124+working width
Width(mm) 1950
Height(mm) 2600

Company Profile

 


24+: With 24 years of dedicated research and development of textile machinery, manufacturing, sales and service in 1 of the modern state-level high-tech enterprises.

3+: With 3 large-scale enterprises: HangZhou CZPT New Technology&Scientific Reasearch Co.,Ltd, HangZhou CZPT Intelligent Textile Machinery Co.,Ltd And HangZhou CZPT International Trading Co.,Ltd.

5+: H-FANG provides perfect textile machinery technology solutions with 5 major categories.

350000000+: H-FANG produces over 300 sets of various textile machines and 2 million spindles of compact spinning every year, with annual sales about RMB 350 million. Main products both warping machine series has NO.1 market share in China.

Packaging & Shipping

Certifications

Detailed Photos

 

Exhibition

FAQ

1: What kind terms of payment can be accepted?
A: For the payment terms, L/C, T/T, D/A, D/P can be accepted.

2: What certificates are available in Machinery?
A: For the certificates, CE, ISO are available.

3: What about the delivery time?
A: 1-3 months after receiving advance payment.

4: What about the warranty time?
A: 12 months after shipment or 15 months after delivery, whichever occurs first.

5. What about the Minimum Order Quantity?
A: The MOQ is 1 set.

 

Type: Rebeaming Machine
Voltage: 380V
Computerized: Computerized
Precision: High Precision
Certification: CE, ISO9001: 2000
Warranty: 1 Year
Customization:
Available

|

Customized Request

chain

Types of roller chains and their applications

There are many factors that can cause premature wear of the roller chain. They include friction, external shocks, and lack of lubrication or adjustment. Here are some tips to help you prevent premature chain wear. Read on to learn more about the different types of roller chains and their applications. You’ll be surprised how quickly the roller chain wears out! Below we have listed some of the most common causes of premature roller chain wear.

Double strand heavy-duty roller chain

If your application requires a heavy-duty chain, a double-strand steel roller chain is an excellent choice. Double-strand steel roller chains are manufactured to reduce stress fatigue and stretch, making them ideal for industrial and logging equipment. This type of chain is also heat-treated and shot-peened for excellent fatigue resistance and strength. Listed below are some of the advantages of double-strand heavy-duty roller chains.
When comparing single-strand and double-strand heavy-duty roller chains, double-strand steel roller chains are generally better. They have twice as many side plates and a working load close to that of a twin-strand steel roller chain. Unlike single-strand steel roller chains, double-strand roller chains are not interchangeable with standard double-sprockets. They use sprockets specially made for double chains.
Double strand chains are particularly strong, resistant to rust and corrosion, and ideal for high-stress applications. They are commonly used in conveyor systems, paper mill equipment, ditches, lifts, seed drills, and various hoisting machinery. They are also used in the wastewater and food processing industries. Chains of this type are used on conveyor lines, so they are an excellent choice for heavy machinery.

Nickel-plated chain

Nickel-plated roller chains are ideal for outdoor work, mildly corrosive environments, and applications requiring a good chain appearance. Nickel plating increases component hardness and improves wear resistance while ensuring that all surfaces are protected. The benefits of nickel-plated roller chains include increased durability, corrosion resistance, and a bright shine. Here are a few reasons to use such a chain. All chains are manufactured to the highest quality and safety standards.
Although slightly corrosive, nickel-plated roller chains are ideal for applications in high salt and high humidity environments. However, nickel plating can peel and chip, so nickel roller chains are not recommended for use in food processing or other environments exposed to corrosive substances. ANSI B29.1 standard chain can be nickel-plated and is ideal for a variety of applications including industrial garage doors and boat lifts.
CZPT USA Corp. is committed to being the premier agricultural and industrial chain supplier in the United States. By focusing on quality, they ensure their chains provide long life and unmatched wear resistance. If you’re looking for a quality plated roller chain, consider choosing a chain from a leading manufacturer. If you need the durability and strength of a nickel roller chain, choose CZPT USA Corp. We manufacture the highest quality chains in the USA.
In addition to high strength, nickel-plated roller chains are also available in elastomer profiles. These types of chains can handle 1/2 to 3/4″ loads, depending on their pitch. They are also ideal for gentle traction on sensitive surfaces. The strength of these chains depends on the type of the main link used in the chain. Nickel-plated roller chains are available in a variety of sizes and are priced to suit a variety of applications.

Stainless steel chain

Stainless steel roller chains are ideal for industrial applications in two harsh environments. They have excellent chemical and corrosion resistance, as well as high strength. Chains are available in three grades to meet various operational needs. 304SS is suitable for food contact applications, while 316SS and 606SS offer excellent corrosion resistance. 600 series stainless steel provides excellent corrosion and wears resistance with precipitation hardened components.
In food processing, stainless steel chains are often exposed to extremely high temperatures and high concentrations of acids, alkalis, and water. They are also resistant to high concentrations of acid and chlorine. And their low magnetic permeability allows them to function properly in hygienic conditions. But stainless steel roller chains also have some disadvantages. Despite their excellent corrosion resistance, these chains are not recommended for use in food processing environments.
Compared to carbon steel, stainless steel roller chains are softer and hold longer. This means it may wear out faster. Since stainless steel is not heat-treated, its surface hardness is different from carbon steel. It retains heat for longer, reducing its tensile strength and extending its lifespan. Nonetheless, stainless steel roller chains are ideal for a variety of industrial applications.
The stainless steel roller chain is made of high-quality material. For example, the Premier series stainless steel roller chains are manufactured in Japan using a special type of stainless steel shot peening process. They also feature a solid roller design that reduces side flex. The Premier range also features highly polished side panels and is available in 10′ boxes, 50′ reels, and 100′ reels. They can also be cut to length if necessary.

Accumulation conveyor

Roller chain accumulation conveyors are designed to transport loads up to 440 lbs or 200 kg. The accumulator chain is located on large idler rollers to ensure quiet operation and the minimum force required to hold the pallet. They are suitable for various applications and can be integrated into the entire processing system. These conveyor belts have T-slots on three sides of the profile frame for connecting brackets and sensors.
Sensors installed in the accumulation area detect objects on the conveyor line and send signals to the motors that power the accumulation area. The motor can be external or built into the drum itself. Other types of sensors use light, such as photosensors. Photoelectric sensors detect objects by emitting and receiving specific wavelengths of light. This option is cost-effective because the sensor rollers are located slightly above the surface of the conveyor line.
Roller chain accumulation conveyors can be constructed of steel or plastic rollers. It can be equipped with staggered or coaxial rollers. Safety cover prevents accidental insertion of fingers into the chain, improving operator safety. The safety cover is compatible with the chain type and required bend radius. These caps are made of plastic clips that fit permanently on the inner links of the chain. They do not interfere with conveyed goods or workpiece carriers.
There are two basic types of accumulation conveyors: free flow and accumulation. Free-flowing chains allow conveyed objects to slide directly onto the chain while stacking chains allow goods to slide under the chain. Accumulation chains are commonly used in the food and packaging industries and have rollers that support conveyed objects. The free-flowing conveyor system eliminates the risk of damaging objects, as the rollers in the accumulation conveyor are in direct contact with the bottom of the cargo.
chain

Custom attachment

Standard accessories for roller chains are available in a variety of styles. Typically, they can be assembled on pin or roller links. When referring to connecting chains, it is important to know how to refer to pitch and center-to-center spacing. The pitch of the roller chain should include inner and outer roller links and must alternate every three pitches. Additionally, you can order custom accessories for pin or roller linkages. Below are some examples of custom accessories for roller chains.
Stainless steel roller chains are one of the most well-known chains for this application. It has a stainless steel 304 finish to create curved and straight lugs. For even more flexibility, you can also request custom accessories such as chain plate holes and pins. For added safety, various accessories can be attached to the single-pitch roller chain. It can also be made with multiple pins or curved lugs.
HKK Chains is stocked with much stainless steel and carbon steel standard connecting chains. Most of the time, they can assemble a custom accessory chain in no time. For example, a single-pitch chain with two connecting holes is called a wide profile. Additionally, chains can be manufactured in a variety of materials, including carbon steel, stainless steel, Lambda, plastic, and Ultra WP. In addition, a wide range of unique accessories is available for special industries.

China Good quality Factory Direct Sale Rebeaming Machine/Long Chain Beaming   roller chain breaking toolChina Good quality Factory Direct Sale Rebeaming Machine/Long Chain Beaming   roller chain breaking tool
editor by CX 2023-04-24

China Good quality Factory Sale Welded Galvanized SUS Link Chain 304 316 Stainless Steel Link Chain Anchor Chain 8-13mm ca550 roller chain

Product Description

Factory sale Welded Galvanized SUS link Chain 304 316 Stainless Steel link Chain anchor chain 8-13mm

Manifish Marine Hardware                                                                                             
*Sets easily in a variety of bottoms including mud, sand, rock, and more *Modeled after the original CZPT Anchor *Constructed of CZPT mirror polished 316 Stainless Steel Self launching and fits a large number of bow rollers *Lifetime warranty against breakage316 Stainless Steel Pad Eye Fender Hook Open Type Polish Marine Yacht Hardware Clothes Fender Hooks
marine outletboat accessories leds lights marine hardwaresail rail hook Oblo

produce details                                                                                    

Product name

stainless steel boat accessories

Certification

CE/SGS/ISO9001

Weight(kg)

<1000kg

Color

Silver

Place of Origin

ZheJiang China

MOQ

1pcs

 

After-sales Service: One Year
Warranty: 12 Months
Material: Stainless Steel
Certification: CS
Design: Anchor Chain
Finish: Highly Polished
Samples:
US$ 100.00/Meter
1 Meter(Min.Order)

|
Request Sample

chain

Types of Roller Chains

There are several types of roller chains available. These chains have different properties and serve different purposes. Here you will learn about diamond roller chains, X-ring and O-ring chains, inverted tooth chains, and self-lubricating chains. You can choose the type that best suits your needs by reading this article. It will also help you make an informed decision. Buying the right roller chain for your needs is easy. Hope this article is helpful to you!

Diamond roller chain

Diamond roller chains are more efficient than other chains and can significantly extend chain life. The superior design of the chain prevents internal rust from seeping out. Additionally, Diamond ACE features a corrosion-resistant exterior and a zinc-nickel pre-assembled coating that provides extended corrosion protection and wear resistance. These features reduce chain downtime and labor costs, saving a building materials manufacturing company nearly $33,000 over the life of its machines.
Diamond series chains lead the industry in quality and durability, with industry-leading tensile strength and the lowest total cost of ownership. With a diverse product portfolio including standard chains, specialty chains, and custom chains, the company is sure to provide the right chain for your application. The company also offers a wide range of accessories for a variety of machinery. For more information, please visit the company website.
As one of the leading manufacturers of roller chains, the CZPT Company offers unparalleled expertise and wear resistance in the power transmission market. CZPT is trusted by leading industries and provides the highest return on investment. The diamond is a symbol of strength and durability, and the company chose it as the company’s trademark to convey its core values. CZPTs can last up to 100 years or more in harsh conditions, even in underwater environments.

Self-lubricating chain

Self-lubricating roller chains are designed to increase performance while maintaining a high level of cleanliness. These chains are made of sintered alloy bushings impregnated with lubricant and pins specially treated to release oil when necessary. These chains have a long service life and are suitable for environments where regular lubrication is difficult. Below are the benefits of self-lubricating roller chains.
Maintenance-free self-lubricating roller chains are the perfect replacement for standard roller chains. They are suitable for packaging, printing, textile, and sawmill applications. These chains reduce downtime and increase productivity. Furthermore, they reduce the risk of contamination. Another advantage is that there are many types of self-lubricating roller chains to choose from, allowing you to choose the one that best suits your needs. To learn more about these benefits, read the Maintenance Free Roller Chains Market Report published by Dataintelo.
CAN-AM self-lubricating roller chains ensure stick-free operation. These chains are available in ANSI/BS standard and double pitch variants. They feature oil-impregnated bushings and preloaded sintered steel bushings for long life. These self-lubricating roller chains are drop-in replacements for standard roller chains and run on standard roller chain sprockets.<br/

X-Ring and O-Ring Chains

Both O-ring and X-ring roller chains are sealed and unsealed. You’ll find them on vintage bikes and small economy cars. Other applications include bulldozer treads and conveyor belts. Standard chains are made of simple plain bearings that require lubrication every few hundred miles. While the former is the most affordable type of roller chain, they do require more maintenance than O-rings.
The main difference between the two types of chains is the friction and cost they generate. X-rings are slightly less expensive, but they create less friction than O-rings. X-rings are a more affordable option for road riders, while O-ring chains are more expensive for off-road racers. In some cases, X-ring and O-ring roller chains can be distinguished by the price tag alone.
Both X-ring and O-ring roller sprockets are available in a variety of styles. The two styles offer comparable performance, but there are some key differences to consider. X-rings are generally better for longer travel as they offer greater durability and performance. O-rings are usually more expensive than X-ring chains, but if you’re thinking about long trips, they’re a great option.

Reverse chain

Inverted roller chains are often referred to as silent chains. They have two protrusions on each board. The outer surface is ground to include an angle of sixty or seventy degrees. These protrusions about the working surfaces of the sprocket teeth. The inner surface or shape of the sprocket can clear the sprocket. This produces a silent but still valid chain. This type of chain is used in transmissions to move heavy objects.
There are three basic types of inverted toothed roller chains. Simple chains are single chains, while double and triple chains have two or three strands. In these types of chains, the pins pass through-hardened steel bushings at the ends of the links. The main difference between these types is their size. If you are not sure what size you need, first calculate the capacity of the chain. You might be surprised to learn that the smaller the diameter the better.
The number of links in a reverse roller chain determines the frequency of vibration. The frequency depends on the size of the chain and the length of the chain between the sprockets. The shorter the chain, the bigger the “pull” – the up-and-down jitter caused by the sprocket. This causes additional peak loads on the drive and shortens its life.

PEER Chain’s Heavy Duty Series Double-Stranded Roller Chains

Heavy-duty double-strand roller chains are ideal for industrial and agricultural use as they provide extra stability and strength. PEER Chains manufactures chains in various lengths and pitches and offers different accessories including sprockets and pre tensioned chains. These chains are also available in a variety of different alloys and grades. Listed below are some of the most common uses for heavy-duty double strand roller chains.
Heavy-duty PEER double-strand roller chains are available in a variety of styles and types, including the HKK NICKEL PLATED series. These chains are best suited for outdoor and mildly corrosive applications. They use a patented process to increase fatigue strength and reduce initial elongation. In addition, HKK double pitch twin-strand roller chains are lighter and less expensive than standard roller chains.
The report also highlights the competitive environment and the latest market trends. The report identifies key players in the Roller Chains industry, including manufacturing, sales, and global market share. It also provides detailed company profiles and analyses of each vendor, including recent product launches, partnerships, and mergers and acquisitions. It also provides the competitive landscape, including company profiles, product mix, and production scale. Once you know what to expect from the market, you can make a buying decision.

Maintenance of Mechanical Flexible Couplings

Proper maintenance of mechanical flexible couplings on roller chains is critical to ensuring the proper operation and reliability of the system. Maintenance of these couplings includes periodic inspection of the components. Check for signs of fatigue and wear. Regular inspections will help determine when to replace the coupling. It also helps determine the remaining life of the coupling.
Couplings should be replaced periodically for optimum performance. When replacing, be sure to use the correct parts. Make sure the coupling type matches the coupling type and chain size. Identical coupling parts may not fit, so a cross-reference guide or manufacturer’s spec number may be helpful. Make sure that the coupling is fitted with a suitable roller chain.
Mechanical elastic couplings on the roller chain can be easily lubricated to avoid premature failure. Elastomeric couplings can accommodate minor shaft misalignments and are suitable for high rotational speeds. Also, it absorbs shocks. Its flexibility is due to loose components. Additionally, lubrication is essential to reduce wear on coupling components.
chain

Roller chain size

Knowing the basic dimensions of the rollers is essential if you need to find the right roller chain for your needs. The three key dimensions of a roller chain are pitch, width, and pin diameter. These dimensions are important because they are used to identify the type of chain. These dimensions do not normally appear in chain manufacturer catalogs. They are usually designed for people designing new equipment. They are not important to maintenance technicians, but they are important to know if you are looking for a specific type of roller chain.
Once you know the exact size of the chain, you can move on to choosing the correct type. You can use the printable template to measure your chain, which makes it easy to compare with the size chart. Don’t forget to check the rest of the roller chain’s specs to make sure it fits your machine. Using the Roller Chain Size Chart is an easy way to determine the proper length, width, and height for your application.
When buying a roller chain, be sure to check the number of teeth and the ratio of the two. A common ratio is 2:1. The drive sprocket must have at least twice as many teeth as the roller sprocket. If the chain is used for high precision, check the type of sprocket as this will determine the correct size of the chain. You can also choose between slip-fit ​​and press-fit mid plates.

China Good quality Factory Sale Welded Galvanized SUS Link Chain 304 316 Stainless Steel Link Chain Anchor Chain 8-13mm   ca550 roller chainChina Good quality Factory Sale Welded Galvanized SUS Link Chain 304 316 Stainless Steel Link Chain Anchor Chain 8-13mm   ca550 roller chain
editor by CX 2023-04-21

China Good quality Hardware Use for Motorcycle/Bicycle Chain Four Sides Riveting Combine Harvester Stainless Steel Transmission Chain Conveyor Chain Roller Chain Motorcycle Chain bush roller chain drive

Product Description

Model NO. 06C/08A/10A/12A/16A/20A/24A/28A/32A/40A/06B/08B/10B/12B/16B/20B/24B/28B/32B/40B-1/2/3
Heavy duty
Chain Model Roller Chains
Structure (for Chain) Roller Chain
Specification GB/T, DIN, ANSI, ISO, BS, JIS.
Origin HangZhou, ZheJiang
Color Solid Color
Chain Color Customized

Our company

Wolff Chain Co. is 1 of the professional chain manufacturers in China. We focus on reseaching, manufacturing and trading of the chain drive with famous brands — “DOVON” and “DECHO”. We supply OEM services for many famous enterprises such as SUZUKI, XIHU (WEST LAKE) DIS., FAW, AGCO, JUMING as well. 

Wolff mainly producing the Transmission chains,Conveyor chains,Dragging Chains,Silent chains,Leaf chains,Roller chains,Special chain and many other series of chain products. Our technicians a have improved the chains quality to the world-level. High quality material selection, powerful and precise heat-treatment technology and excellent assembly methods ensure Wolff chains meet the tough and strict requirements for machines and vehicles. 

All of our products completely conform to the international standard such as ISO\DIN\ANSI\BS\JIS, etc. Wolff has been successfully certified by ISO9001 Quality Management System,SGS inspection and BV inspection. Wolff chains can be widely applied to many industries including automobile, motorcycle, forklift, wood processing machine, constructure machine, packing machine, food machine,tobacco machine and agricultural equipments. Wolff chains are popular in America,South America,Europe,Middle East, South East Asia and Africa markets.

Our workshop

Our certification

Welcome to our exhibition

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment
Surface Treatment: Oil Blooming
Structure: Roller Chain
Material: Carbon Steel
Type: Short Pitch Chain
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Three important aspects of the drive chain

One of the advantages of a drive chain is that it is relatively light. It sends nearly all of the engine’s power to the rear wheels, even if it loses some power along the way. Engine power on a dyno is different than on the road. Therefore, the chain is the most efficient way to transmit power to the rear wheel. Let’s look at three important aspects of the drive chain. Here are some facts about them.

roller chain drive

When choosing a roller chain drive, consider your application and how much horsepower your system requires. For applications requiring more horsepower, a multi-strand drive is an option. If your horsepower is limited, single-strand drives are a good choice. Otherwise, you may need to choose the smallest pitch chain. However, this may not always be possible. You should also consider sprocket size. In many cases, choosing a smaller chain pitch can increase the number of options.
While proper lubrication and maintenance can last a roller chain drive for years, regular inspections are essential to prolonging its life. After the drive has been operating for 100 hours, a thorough inspection every 500 hours is recommended. During this inspection, look for key elements such as 3% elongation and chain wear. If the chain is not preloaded, elongation will happen very quickly. In either case, the industry-recommended 3% elongation will be achieved faster.
chain

flat top chain

The flat-top chain system consists of hinge pins that support the chain to ensure efficient conveying. There are different types of hinge pins available, namely single and double. The single hinge pin is suitable for short chainplates and lightly loaded products. Dual hinge pins provide increased stability and load capacity. Flat top drive chains can be used in many different industries. In this article, we will learn about some important properties of flat-top chains.
Plastic flat top chains can transport medium to large workpiece pallets. They have a circular arc function that enables continuous drive combinations involving curved circular arcs. Plastic flat top chains are also recommended for workpiece pallets with PA wear pads. Steel flat-top chains can withstand surface loads up to 1.5 kg/cm, and HD profiles are suitable for steel chains. This chain is used in a variety of applications, including packaging machines.

mute chain

There are several types of mufflers that can silence your drive chain. One is the Ramsay silent chain, also known as the inverted tooth chain. These chains can be custom designed for specific needs. Exclusive Australian distributor of CZPT products that can help you find the most effective and affordable silent chain. In addition to silent chains, CZPT also manufactures sprockets and other hardware required for the drive.
Another type of mute chain is the CZPT chain. CZPT chains have involute teeth, while the ANSI standard specifies straight teeth. The advantage of silent chains is reduced noise and vibration output, and wider chains are more economical than multi-strand roller chains. The downside of silent chains is that they wear out quickly without lubrication.
The mute chain consists of two main parts, the pin and the plate. The pins are rotated in the same direction and positioned so that they can only engage the sprocket from one direction. Therefore, mute links are not recommended for reverse applications. To find out if your chain will work in reverse, consult the manufacturer’s catalog. CZPT chain.

conveyor chain

Drive chains and conveyor chains are essentially the same, but they are very different. The transmission chain is mainly used to transport heavy objects, and the conveyor chain is used to transport light objects. On the other hand, drive chains are usually driven by belts. Both types of chains can be used for the same purpose. This article will cover both types of chains. You can use them to convey various types of materials and products.
There are some differences between belts and chains, but both types can perform similar functions. The drive chain is used to drive the rollers, while the belt is used to move the object horizontally. The drive chain usually drives the rollers that move the conveyor belt. For a wide range of applications, conveyors and drive chains can be customized to meet specific needs. Here are some common uses of these two chains:
chain

time chain

Timing chains fail for two reasons: complete damage and fatigue. Fatigue occurs when a timing chain reaches its breaking strength, and eventually, failure occurs when a timing chain exceeds its design life and suffers mechanical damage. Most timing chain failures are a combination of mechanical failure and fatigue. Chain chatter, engine misfires, and VVT systems can accelerate chain fatigue. If these causes of premature timing chain failure are not addressed, the timing chain could be permanently damaged.
In the past, the timing chain was the only drive chain available. Timing belts are a quieter alternative, but they are prone to failure and damage to valves and the engine. In recent years, OEM manufacturers have begun to return to the OHC/DOHC drive chain of the timing chain. This type of drive chain has many advantages, including the ability to simulate knock sensor vibrations. Additionally, the chain has better NVH performance, making it the drive chain of choice for automakers.

Timing Chains in Internal Combustion Engines

Internal combustion engines use timing chains to control intake and exhaust valves. The chain turns the camshaft at the right time and coordinates the movement of the valves on the cylinder head. This in turn allows the engine to generate power. The timing chain also controls the position of the intake and exhaust valves, ensuring that fuel and exhaust gases are expelled at the correct time. Incorrect timing in the vehicle can lead to misfires and other problems.
Chain drives in internal combustion engines are a common feature of many modern cars. It transmits rotational force from the crankshaft to the camshaft, which in turn controls the opening and closing of valves. The chain is lubricated with oil to prevent wear. Therefore, timing chains are often used in high-capacity engines, including trucks and motorcycles. But they do have some drawbacks.
A weakened timing chain can cause the engine to misfire, causing it to skip gears and lose coordination. A clicking sound may also indicate a problem. If the chain is too loose, it can also cause the engine to stall. If the chain is too loose, metal chips will appear in the oil. A clicking sound may also be heard when the engine is running. If you hear the engine stalling, it’s likely that the timing chain is the culprit.

Silent chains in internal combustion engines

The pitch difference between the drive sprocket and the silent chain reduces resonance sound, meshing shock, and accelerated wear at the chain and sprocket interface. The difference in pitch between the drive sprocket and the silent chain determines the loudness of the sound, and the system described here helps reduce it. The present invention is suitable for power transmission in internal combustion engines.
The earliest designs for silent chains come from the 1500s when Leonardo da Vinci sketched them. The SS Britannia propels the boat across the Atlantic using huge silent chains. By the mid-19th century, silent chains were used in nearly all types of industrial applications and as timing chains for early automobile engines. Due to their durability, these chains are durable and have smooth action.
In order to understand the mechanism of frictional losses in chains, various parameters must be considered. Speed, pitch, temperature and tension are the main parameters affecting friction loss. This test uses two types of chains to compare the frictional behavior between these two components. The results show that a single chain with a high pitch can increase the friction torque of another chain with the same pitch. These results provide an important basis for understanding the role of friction torque in internal combustion engines.
chain

lifting chain

Lift chairs are designed to lift heavy objects and can be used with a variety of lifting equipment, including forklifts and cranes. Hoist chains are also used in warehouses and ports of all sizes and consist of a series of pins and plates that mesh with each other to move heavy loads. ​​​CZPT Chain manufactures high-precision lifting chains. Here are some of the benefits of hoist chains for drive chains.
Blade Chain: This type of drive chain has a patented U-profile that turns the flexible chain into a highly stable outer post during the push phase. This design is designed to minimize linkage tangling and provide better pressure transfer. These chains are used for cranes, anchors and straddle carriers. Blade chains are more durable than other types of drive chains and are especially useful in heavy duty applications.
The drive chain is also available in a variety of materials. For example, square link chains are commonly used in cranes and hoists. They are cheap to manufacture but more prone to overloading. Conveyor chains are specially designed for chain conveyor systems. It consists of a series of interconnected rectangular links. Oval links tend to kink and are usually only used at low speeds.

China Good quality Hardware Use for Motorcycle/Bicycle Chain Four Sides Riveting Combine Harvester Stainless Steel Transmission Chain Conveyor Chain Roller Chain Motorcycle Chain   bush roller chain driveChina Good quality Hardware Use for Motorcycle/Bicycle Chain Four Sides Riveting Combine Harvester Stainless Steel Transmission Chain Conveyor Chain Roller Chain Motorcycle Chain   bush roller chain drive
editor by CX