Spherical/Polygon Interlock Flexible Exhaust Pipe Making Equipment

one. Item Specifics

What can our machine generate?

1. Round Interlock Hose (2S & 3S)
2. Polygonal Interlock Hose (2S & 3S)
3. Interlock Hose with Yarm
four. Automobile / Boat Engine Versatile Exhaust Pipe

Framework

2. CZPT Parameter

a. Device No.1:
 

Equipment Type	CF-one hundred fifty
Obtainable Condition	Spherical or polygonal with different forming dies
Dimensions variety	ID38-one hundred fifty
Forming velocity	150-350m/8hrs
Strip thickness	.twenty five-.5mm
Strip width	16 and 20mm
Energy	4KW
Outer proportions	3500mmX1200X1600mm
Bodyweight	950kgs

b. Machine No.2:
 

Device Type	CF-three hundred
Available Form	Spherical or polygonal with distinct forming dies
Dimensions assortment	ID150-300
Forming pace	100-200m/8hrs
Strip thickness	.twenty five-.8mm
Strip width	16,20, 28, 32mm
Electricity	11KW
Outer proportions	3500mmX1200X1600mm
Fat	1200kgs

c. Other Types’ Parameter

 

Making size/mm	ID38-150	ID75-three hundred	ID200-four hundred	ID38-65
Speed M/H	one hundred-a hundred and twenty	a hundred and fifty-four hundred	100-one hundred twenty	a hundred and fifty-four hundred
Strip dimensions /mm	sixteen-20*.twenty five-.5	twenty*.45m	28*.five-.8	fifteen*.twenty five
Sort	Polygonal	Spherical	spherical	polygonal

3. Device Instruction

Principal: the machine included sophisticated engineering, the common wheels and four pairs of forming wheels will be utilized to type the hose step by stage. The measurement of the interlock hose will be identical as forming mould.
Process:
1. Seven pairs of wheels are all transmission wheels (refers to wheel drawings), the initial pair of wheel is positioning (refers to wheel drawing 001).They can not be pressed way too hard to prevent also rapidly feeding.The allowable tolerance in the two sides can not be a lot more than .3mm. The 3rd pair are folding wheels(refers to drawing 3),the folding degree of asymmetry will not be far more than .3mm. The fourth pair folding & shaping wheel(refer to wheel drawing 004), the strip will be folded and shaped to be 90° angle. The fifth pair (refer to drawing 5) will make 90° angle strip 60° angle.
2. Right after the strip goes through 7 pairs of wheels, wind and fix the strip on the forming mold, and then press the slot stage by action with seven pressing wheels. Run the equipment slowly until the proper hose arrives out.
three.The transmission wheels have been altered prior to shipping and delivery from the factory.

When adjusting the 4 middle urgent wheels, remember to be aware: the initial pair can not be way too tight, then the second will be tighter than 1st, the other will be by the exact same way.
The turning course of heart pressing wheels:

Altering Method:
The seven pairs of wheels(1-seven) will be positioned with spacers, the higher wheel should be in the very same center line with lower wheel, do not resolve them. There are spacers inside of lower wheels which have been modified ahead of supply. The spacers outside the house the wheels will be pressed by the nuts. The spacers of various thickness will be utilized to make sure the reduced wheel just in the heart of the strip and equally sides folded similarly. The five pairs of wheels have to be pressed down parallelly with very same force. Make confident the strips are not destroyed when urgent down the wheels.
Never fasten the nuts on the pressing equipment to keep the spring inside of can go freely.
You need to have to set gasket when it is essential to make restricted interlock hose.
When alter the transmission wheels, it is necessary to loose all wheels, and then permit the wheels slide down freely and then fasten.
Keep the distance among pressing wheel assistance and the huge plate of the device one.5mm a single than one more clockwise.(for three-s equipment, it will be 1.0mm)
Maintenance:

1. Insert the grease in the chain wheel and chain just before start-up and hold the shaft and chain are greased correctly.
2. Operate the device with uniform speed, in no way accelerate or reduce the speed all of a sudden. When commence up the equipment, the velocity must be less than 400r/min and max. pace ought to not be much more than 800r/min.
3. Cut off the electrical power provide when the equipment is not running.
4. Fasten the nuts on the wheels and stop them from sliding and preserve check to make confident.

4. Organization Overview

Comflex CZPT Co.,Ltd

We supply all kinds of devices related to hoses, bellows, and fabric growth joints with far more than 35 years. Meanwhile, we can also design and style and manufacture specific equipment in accordance your special prerequisite. Our equipment have been exported to several nations, these kinds of as Ukraine,Russia, Viet Nam, India, Canada, Australia, Italy, France, Uk, Turkey, and many others.. We guarantee you long-phrase mutual useful cooperation relationship!

5. Software

Exhaust hose producing device are widely employed to manufacturing exhaust pipe or flex connectors for the truck. When compared with interlock ASS hose, the three-s hose has the pursuing features:

• Reduced leakage
• Much better sealing overall performance
• Adaptable
• Exhaust connector, Exhaust pipe for the truck.
  CZPT versatile metallic hose producing.
• SS & sss type, spherical & polygonal sort

No	Dimension	Produce speed/hr	Strip size(width*thickness)
1	7mm	200	4mm*.22mm
2	9mm	200	6mm*.2mm
3	11,14mm	200	seven.1mm*.2mm
four	sixteen,18,21mm	115	8.6mm*.2mm
five	26,29,30mm	one hundred	nine.5mm*.23mm
6	32,35mm	a hundred	twelve.7mm*.25mm
seven	37,42mm	one hundred	15mm*.3mm
eight	45,51,55mm	a hundred	17mm*.35mm
nine	sixty,63,70,seventy six,80mm	eighty	21.2mm*.45mm
ten	89,95,102mm	70	25mm*.55mm

six. Packing & Shipping

7. CZPTer Visit

8. Certification

FAQ for interlock hose making machine

 
Q:Why choose us as your supplier?
A:We are most professional in flexible conduit making machine with more than 30 Years’ experience

Q: What can you supply for flexible conduit making machine?
A: Interlock hose making machine
    Squarelock hose making machine
 
Q:What sizes you machine can make?
A: Interlock Hose:ID3-ID450 on different machines

We need to know the following information to quote you correct machinery:

Q:What type of flexible conduit you need?
A:For instance, square lock or interlock hose, please send us profile drawing or picture to us.

Q:Hose size range
A:Such as:DN8-DN200

Q:Material of hose
A:Such as: Stainless steel (304,316L)/Galvanized steel

Q:Product type
A:Round/Polygonal interlock hose